| |
|
|
|
| Pipettes have a tip length of 1.0 mm and a tip bend angle of 30 degrees. |
Product Code |
Type |
Specifications |
Example |
LHS, ZHS |
Holding |
OD: 120 ± 10 um
ID: 25 ± 5 um
Heat polished tip |
|
LISR, LISL
ZISR, ZISL |
Injection |
OD: 7 ± 0.5 um
ID: 5 ± 0.5 um
Bevel: 30 degrees
Blunt-sharp spike |
|
LBSR, LBSL
ZBSR, ZBSL |
Embryo Biopsy |
OD: 30 ± 5 um
ID: 28 ± 5 um
Bevel: 40 degrees
Heat polished tip |
|
LDS, ZDS |
Zona Drilling |
OD: 12 ± 2 um
ID: 10 ± 2 um
Tip: 90 degrees |
|
LCS, ZCS |
Zona Cutting (PZD) |
OD: 2-3 um (tip)
Sharp point |
|
|
OD = outer diameter, ID = inner diameter.
Injection and biopsy pipettes are available in right and left hand options so the bevel always faces the user. |
| |
| CUSTOM SPECIFICATIONS |
If the standard specifications do not suit your requirements, we can manufacture pipettes to your exact design and specifications.
We maintain stocks of many different types of custom pipettes, so we may already have the pipettes you require. Here are examples of custom pipettes that we keep in stock. The specifications are the same as standard pipettes except as indicated below. |
Product Code |
Type |
Custom Specification(s) |
LHC-ID15 |
Holding |
ID = 15-20 um |
LHC-ID30TA35 |
Holding |
ID = 30 um, tip bend angle = 35 degrees |
LHC-OD100ID20 |
Holding |
OD = 100 um, ID = 15-20 um |
LHC-OD100TA35 |
Holding |
OD = 100 um, ID = 15 um, tip bend angle = 35 degrees |
LHC-OD75TA35 |
Holding |
OD = 75 um, ID = 15 um, tip bend angle = 35 degrees |
LHC-TA35 |
Holding |
Tip bend angle = 35 degrees |
LHC-TL1.5 |
Holding |
Tip length = 1.5 mm |
LICR-TA20 |
Injection |
Tip bend angle = 20 degrees |
LICR-TA25 |
Injection |
Tip bend angle = 25 degrees |
LICR-TA35 |
Injection |
Tip bend angle = 35 degrees |
LICR-ID4TL0.6 |
Injection |
ID = 4 um, tip length = 0.6 mm, tip bend angle = 30 degrees |
LICR-ID4TA30 |
Injection |
ID = 4 um, tip length = 0.6 mm, tip bend angle = 35 degrees |
LICR-BA21TL0.6 |
Injection |
OD = 6.5 um, bevel angle = 21 degrees, tip length = 0.6 mm, tip bend angle = 30 degrees, NO SPIKE |
LICR-BA21TA35 |
Injection |
OD = 6.5 um, bevel angle = 21 degrees, tip length = 0.6 mm, tip bend angle = 35 degrees, NO SPIKE |
LICR-OD5 |
Injection |
OD = 5 um, NO SPIKE |
LICR-OD8 |
Injection |
OD = 8 um, FOR LARGE SPERM |
LICR-OD10 |
Injection |
OD = 10 um, FOR LARGE SPERM |
LICR-RT |
Injection |
Steeper taper (more rigid tip) |
LICR-TA35-RT |
Injection |
Steeper taper (more rigid tip), tip bend angle = 35 degrees |
LICR-SBS |
Injection |
SHORT SPIKE |
LICR-TL1.5 |
Injection |
Tip length = 1.5 mm |
SIS |
Injection |
STRAIGHT (unbent) |
LBC-OD15BA90 |
Embryo Biopsy |
OD = 15 um, no bevel |
LBC-OD20BA90 |
Embryo Biopsy |
OD = 20 um, no bevel |
LBC-OD27BA90 |
Embryo Biopsy |
OD = 27 um, no bevel |
LBC-OD32TA35 |
Embryo Biopsy |
OD = 32 um, tip bend angle = 35 degrees, no bevel |
LBC-OD35TA35 |
Embryo Biopsy |
OD = 35 um, tip bend angle = 35 degrees, no bevel |
LBCR-OD40TL1.5 |
Embryo Biopsy |
OD = 40 um, tip length = 1.5 mm |
LDC-TA35 |
Zona Drilling |
Tip bend angle = 35 degrees |
LDC-OD9TA35 |
Zona Drilling |
OD = 9 um, Tip bend angle = 35 degrees |
|
|
|
